Specs

Coolant Pump specs

Setup notes and briefing numbers for Coolant Pump.

Pump plate details to verify

The Coolant Pump specs page gives the technical points needed to match a replacement pump to the machine in service. Use it to review fitment, flow-related requirements, and the pump layout already on the machine.

Start with the data on the pump plate and the machine model. For a correct replacement, compare voltage, phase, kilowatt rating, outlet size, immersion depth and the style of the mounting flange. Gauteng workshops often also check supply stability, chip load and sump condition before selecting a pump.

Take photos of the pump in the tank and the pipework connection before removal. Include the terminal box, cable entry, strainer, mounting holes and the height from the flange to the intake, because these points decide whether the new unit drops straight into place. A quick record also helps when the machine has had older modifications over time.

Readings that matter on site

Match the pump to the machine, not only the part name. Check coolant type, expected flow to the cutting zone, head height back to the outlet, and whether the machine uses flood coolant or a smaller recirculation arrangement. Bronze, cast iron and engineering plastic components can behave differently depending on the fluid and the amount of fine swarf in the sump.

Before ordering, compare the pump reference against the machine tag and measure the existing mounting face. Confirm the discharge direction, hose or pipe thread, and the available clearance around the tank lid and chip tray. Worn machine-tool parts are matched from the maker's plate, so a clear shot of that plate belongs in your enquiry.

  • Motor rating matched to supply
  • Flange depth checked at sump
  • Outlet size and thread confirmed

Workshop conditions affecting pump choice

Randburg and wider Gauteng sites often deal with abrasive fines, dirty sumps and machines that have seen more than one retrofit. Those conditions make strainer design, shaft sealing and impeller clearance worth checking properly. Where a machine stands near grinding or heavy cast iron work, contamination can shorten pump life if the sump is not cleaned at the same time.

Coastal humidity can push corrosion higher on exposed hardware and terminal covers. Inland dust and unstable power can affect motor cooling, startup current and the reliability of thermal protection. On older machines, inspect the contactor, overload setting and cable condition when a coolant pump has failed unexpectedly.

Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.

Measurements to send with enquiry

Note the flange shape, bolt centres, pump body diameter and the length below the mounting face. Add the motor voltage, phase, hertz, full-load amps and any arrow showing rotation direction.

If the old pump still runs, record the current draw and whether flow drops when the coolant warms up. Keep those readings with the job card so the replacement can be checked against the machine's actual operating conditions.

What our Machine Tool Parts customers say

Verified Google reviews