Specs

Servo Cable specs

Setup notes and briefing numbers for Servo Cable.

Servo cable details that matter

The Servo Cable specs page lists the information needed to confirm the correct cable for a machine repair. Use it to compare connection layout, length requirements, and the application already installed on the equipment.

Record the drive and motor model numbers before comparing any cable data. The key points are connector style, core count, shielding, overall length, and whether the cable carries feedback, brake, or power functions. Randburg workshops often need these checks done against older retrofits where the original loom has been changed more than once.

Photos should show both cable ends, the full routing, and any damaged section. Include bends near the plug, rubbing marks in drag chains, oil staining, and broken locking rings. Those details help distinguish a wrong specification from a cable that failed because of heat, swarf, vibration, or poor strain relief.

Checks before ordering replacement

Confirm pin arrangement, outside diameter, and the installed length from cabinet to motor with enough allowance for movement. A servo cable that looks close can still cause encoder errors, intermittent alarms, or connector damage if the mating face and shielding are not correct. For rebuild work, note any non-standard glands, conduit, or junction points fitted on the machine.

Match the specs entry to the machine nameplate and the removed cable label before opening a wider parts enquiry.

  • Pinout checked against motor side
  • Measured length includes travel allowance
  • Cable label copied exactly

Workshop conditions affecting cable life

Cable specification is not only about plug shape. Heat from nearby spindle drives, oil mist in enclosed machines, and constant axis cycling all influence sheath material and screening performance. On South African shop jobs, older equipment may also carry mixed-era components that need careful identification before a replacement is chosen.

Coastal sites should check for green corrosion at pins and braid terminations. Inland workshops around Johannesburg often see fine dust entering open connectors during maintenance, which can affect contact quality. After power-cut events or unstable supply conditions, inspect for alarm history that points to feedback faults rather than a mechanical breakdown.

Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.

Information to send with specs

Include the machine model, axis name, alarm text, and any part number printed on the outer jacket or backshell. Note whether the fault appears only in motion, at power-up, or after the cabinet warms up.

A useful record also includes measured cable length, connector photos, and whether the installed run passes through a drag chain or fixed conduit. Keep that note with the job card and parts list so purchasing can match the specification to the machine under repair.

What our Machine Tool Parts customers say

Verified Google reviews